Echo Audio Mona Manuel du propriétaire télécharger pdf (Page 13)

Mona provides 48 volts of phantom power for microphones that require it.

To enable phantom power press the button labeled +48V (the LED next to it

will light up) and phantom power will be provided to all microphone inputs.

Note:

Phantom power will not be applied to any line level equipment or

guitars plugged in using ¼” connectors.

Mona’s Line Input (1/4” TRS, Impedance: 10K, Trim:

0 – 40 dB)

When a ¼” connector is plugged into Mona’s universal input jack, the

microphone preamp is disconnected and a line input amplifier is inserted in

its place. If the “guitar” switch is out, the line input provides a balanced

connection (for TRS plugs) and the trim knob has a range of 0 to 40 dB.

The input impedance for line-level signals is 10K. Full-scale input is 22dBu

with the trim set to zero.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 82 83

Pas de commentaire

Echo Audio Mona Manuel du propriétaire Page 13