Echo Audio Mona Manuel du propriétaire télécharger pdf (Page 62)

Hopefully, your system will now be functioning properly. If not, please refer

to the “Contacting Customer Service” section of this manual. We’ll do our

best to help you solve your problem.

Reconfiguring an IRQ within Windows 95/98 - PCI

Now that you have identified the offending card and the IRQ in contention,

you will want to try to reconfigure its IRQ setting. To do this, you must

open the Device Manager. Select Start – Settings – Control Panel –

System, and click the Device Manager tab. Find the entry for the PCI card

that is causing the problem, highlight it, and click the Properties button. In

the properties window that appears, select the Resources tab. Make sure

that “Use automatic settings” is unchecked, highlight “Interrupt Request,”

and click the Change Setting button. Some cards will allow you to change

the IRQ setting at this point, while others will give you a message saying,

“This resource setting cannot be modified.” If you are allowed to change

the IRQ, a window will appear that lets you choose from several different

values. Scroll through the different values until you find one that says, “No

devices are conflicting.” Choose that one and keep selecting OK until

Device Manager is closed, then restart Windows.

If you are unable to reconfigure the IRQ and you have a free PCI slot, you

may want to try moving Mona or the offending card to a different slot.

Make sure your computer is off first, and follow the safety instructions in

this manual for hardware installation. Sometimes this can help, because

Windows will assign a different IRQ depending on which slot the PCI card

is in.

Hopefully, your system will now be functioning properly. If not, please refer

to the “Contacting Customer Service” section of this manual. We’ll do our

best to help you solve your problem.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 82 83

Pas de commentaire

Echo Audio Mona Manuel du propriétaire Page 62