Echo Audio Mona Manuel du propriétaire Page 64

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 83
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 63
64
Note that you must do this if you want to use Gigasampler (see the section
on Gigasampler in the Audio Software FAQ below).
Q: Does this mean I can play games through Mona?
Sure. The only snag is that many games use CD audio for their background
music. Since the Mona card does not have a CD audio connector, you won't
hear the music. If you are really determined; it would be fairly
straightforward to run a cable from the headphone jack on your CD-ROM
drive to the inputs on Mona and set up the monitors in the console.
Radio Shack sells a handy cable for this 1/8 stereo connector to a pair of
RCA male connectors. You will also need a pair of female RCA to male
quarter-inch adapters.
Q: What's the story with the DirectSound format lock?
This setting only applies if you are using software that uses multiple
DirectSound outputs simultaneously, such as the applications offered by
Stage Research.
It appears that DirectX 6.1 and 7 get confused when they see multiple
DirectSound outputs. The first output pair gets set up correctly, but the rest
of them don't. To work around this problem, just enable the DirectSound
format lock and select the appropriate sample rate. In almost every case,
you will want to leave the format set to 16 bit and stereo.
We are told that future versions of DirectX will resolve this problem, but for
now just lock the format.
Note that this is not the same as the sample rate lock feature, which is
documented in the Echo Console section of this manual.
Vue de la page 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 82 83

Commentaires sur ces manuels

Pas de commentaire