Echo Audio Mona Manuel du propriétaire télécharger pdf (Page 25)

Monitor Controls

Below the input channels are the input monitor controls. The input monitor

controls allow you to monitor the input signal via any of the available

outputs on your Mona. Each input channel pair has a corresponding monitor

control pair directly below it on the console. At the top of each monitor pair

are radio buttons that allow you to selectively mute (M) or solo (S) each

channel. In the middle you will find a pair of faders that will allow you to

set the levels of the monitor signals. At the bottom of the control area there

is a radio button that allows you to “gang” (G) the faders. Ganging the

faders ties them together so that they will maintain their relative placement

with regard to each other. Below each fader is its corresponding pan control.

In the default pan positions (see example below) the signal from input

1(left) will be monitored by output 1(left), and the signal from input 2(right)

will be monitored by output 2(right). Moving a pan control will determine

how much of the input signal is sent to each output channel in the selected

output pair. Both pan controls and faders can be reset to default by pressing

the Ctrl button and left clicking on the control.

Instead of level meters, each monitor control has a series of numbered

buttons. These buttons allow you to select which output channel pair

controls are displayed, so you can adjust them.

The monitors are one of the most powerful functions of the console. When

you are recording, these controls allow you to set the level at which each

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 82 83

Pas de commentaire

Echo Audio Mona Manuel du propriétaire Page 25