Echo Audio Mona Manuel du propriétaire Page 60

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 83
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 59
60
Once you know which interrupt Mona is trying to use, you need to locate
which card is potentially causing the conflict. To do this you may need to
dig out the manuals for whatever ISA cards are installed and examine the
jumper settings to determine which interrupts, if any, are used. Hopefully, at
this point you will find an offending card that was not listed by the Reporter
software but is using an interrupt that Windows has assigned to another
device. If you dont have any ISA cards, or your legacy ISA card is not
causing the conflict, you should take note of which PCI card is assigned to
the same IRQ as Mona.
If you have lost your manuals and are having trouble figuring out which
card may be causing a problem, you can try the brute force approach.
Remove all cards from your system and then re-install them one at a time
until the system quits working. The card that makes the computer stop
working correctly will be the one that needs to be dealt with.
Once the offending card has been identified you have a few different
options. One option is to simply remove the card from your system.
However, youve likely got the card in there for a reason, so unless its an
old sound card you dont care about keeping, youll probably want to use an
approach to remedying the problem that allows the card to remain in the
system.
If the offending card is a legacy ISA card, another option is to change the
IRQ on the card to an IRQ that isnt currently being used as reported by the
Reporter program. While this may fix the problem at hand, the next time
you add another new Plug-and-Play card you may wind up with another
conflict. If you choose this option it is still a good idea to reserve the IRQ as
described below.
If the offending card is a PCI card, you may want to skip to the section on
Reconfiguring an IRQ within Windows 95/98 - PCI a few pages down.
Reserving an IRQ within the BIOS Legacy ISA
Other than removing the offending legacy card, the next most effective
method is to reserve the IRQ for legacy use within your BIOS. To do this
Vue de la page 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 82 83

Commentaires sur ces manuels

Pas de commentaire